Pl2303 Prolific Driverinstaller V110 13

How to Download and Install PL2303 Prolific DriverInstaller v110 13 for Windows 11

If you have a device that uses the PL2303 USB to UART controller to connect to your Windows 11 PC, you may need to download and install the latest driver for it. The PL2303 USB to UART controller is a bridge between a serial port and a USB port, and it allows you to use devices such as RS-232 serial devices, printers, scanners, modems, etc. on your computer.

The latest driver for the PL2303 USB to UART controller is the PL2303 Prolific DriverInstaller v110 13, which is compatible with Windows 11 and supports various PL2303 chip versions. In this article, we will show you how to download and install the PL2303 Prolific DriverInstaller v110 13 for Windows 11 in four easy steps.

Step 1: Visit the Prolific website

The first step is to visit the official website of Prolific, the manufacturer of the PL2303 USB to UART controller. You can go to this link to access the product page of the PL2303 Windows Driver Download.

Step 2: Download the driver installer

The second step is to download the driver installer file from the product page. You will see a link that says \"Download File: PL2303_Prolific_DriverInstaller_v4.0.1.zip\". This is the latest version of the driver installer as of February 2022, and it includes the PL2303 Prolific DriverInstaller v110 13 for Windows 11. Click on the link to download the zip file to your computer.

Step 3: Unzip and run the driver installer

The third step is to unzip and run the driver installer file that you downloaded in the previous step. You can use any zip extraction software such as WinZip or WinRAR to unzip the file. After unzipping, you will see a file named \"PL2303_Prolific_DriverInstaller_v4.0.1.exe\". This is the executable file that will install the driver on your computer. Double-click on the file to run it.

Step 4: Follow the instructions on the screen

The fourth and final step is to follow the instructions on the screen to complete the installation process. You may need to accept some terms and conditions, choose a destination folder, and restart your computer after the installation is done. Once you have installed the driver successfully, you should be able to use your PL2303 USB to UART controller device on your Windows 11 PC without any issues.

Conclusion

In this article, we have shown you how to download and install the PL2303 Prolific DriverInstaller v110 13 for Windows 11 in four easy steps. This driver will enable you to use your PL2303 USB to UART controller device on your Windows 11 PC without any compatibility problems. We hope this article was helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below.

How to Update the PL2303 Prolific DriverInstaller v110 13 for Windows 11

If you already have the PL2303 Prolific DriverInstaller v110 13 installed on your Windows 11 PC, you may want to update it to the latest version to ensure optimal performance and security. There are two ways to update the driver: manually or automatically.

Manual update

To update the driver manually, you need to repeat the steps that we have shown above. That is, you need to visit the Prolific website, download the latest driver installer file, unzip and run it, and follow the instructions on the screen. This method requires some time and effort, but it gives you more control over the installation process.

Automatic update

To update the driver automatically, you need to use a reliable and trusted driver updater software such as Bit Driver Updater. This software will scan your computer for outdated or broken drivers and provide you with new compatible drivers in one click. This method is faster and easier, but it requires you to download and install a third-party software.

How to Uninstall the PL2303 Prolific DriverInstaller v110 13 for Windows 11

If you no longer need or want to use the PL2303 Prolific DriverInstaller v110 13 on your Windows 11 PC, you may want to uninstall it to free up some space and avoid potential conflicts. There are two ways to uninstall the driver: manually or automatically.

Manual uninstall

To uninstall the driver manually, you need to use the Device Manager tool on your computer. You can access it by right-clicking on the Start menu and selecting Device Manager. Then, you need to find and expand the Ports (COM & LPT) category and locate your PL2303 USB to UART controller device. Right-click on it and select Uninstall device. Follow the prompts on the screen to complete the uninstallation process.

Automatic uninstall

To uninstall the driver automatically, you need to use a reliable and trusted driver uninstaller software such as Bit Driver Uninstaller. This software will scan your computer for unwanted or problematic drivers and provide you with an option to remove them in one click. This method is faster and easier, but it requires you to download and install a third-party software. a474f39169