How to Change Serial Number, Type, Model of Lenovo ThinkCentre MT
If you need to change the serial number, type, model or system brand ID of your Lenovo ThinkCentre MT system BIOS menu, you can do so by using a command line program included in the system BIOS update package. Here are the steps to follow:
From the Lenovo support site (http://support.lenovo.com), search for the applicable system BIOS Package for your system, and download the USB Drive/DOS flash program (.zip file).
Create a DOS bootable memory key and unzip the contents of the USB BIOS Flash package to the key.
Power on the system and make sure the device with the flash program is selected as a boot device.
Use the below commands to flash the machine type and model, serial number, or system brand ID in BIOS:
To flash machine type and model: amidedos.exe /sp âStringâ
To flash serial number: amidedos.exe /ss âStringâ
To flash system brand ID: amidedos.exe /sv âStringâ
âStringâ is the target MTM, SN and System Brand ID. For example, to update the machine type and model number to 1234567: amidedos.exe /sp â1234567â
Note: The MTM is typically ten characters in length.
Reboot the system after the update is complete.
This article is based on information from [^1^] [^2^] [^3^]. Please refer to them for more details and instructions.Changing the serial number, type, model or system brand ID of your Lenovo ThinkCentre MT system BIOS menu may be necessary if they are not correct or if you have replaced the system board. Incorrect information in the BIOS menu can cause problems with the system identification and warranty service. Please make sure you have the correct information before proceeding with the update.
Before you start the update, you should back up your data and close all running programs. You should also make sure your system is connected to a power source and has enough battery charge. Do not turn off or restart your system during the update process, as this may damage your system.
If you encounter any problems or errors during the update process, please refer to the troubleshooting section of the system BIOS update package or contact Lenovo support for assistance.After you have successfully updated the serial number, type, model or system brand ID of your Lenovo ThinkCentre MT system BIOS menu, you should verify that the information is correct and matches your system. You can do this by entering the BIOS setup utility and checking the system information page. You can also use Lenovo Vantage or the Windows Command Prompt to check the information from within Windows.
If you find any discrepancies or errors in the information, you should repeat the update process with the correct values. If you are unable to update the information or if you have any doubts about the accuracy of the information, you should contact Lenovo support for further guidance and assistance.
Changing the serial number, type, model or system brand ID of your Lenovo ThinkCentre MT system BIOS menu is a simple and effective way to ensure that your system is correctly identified and serviced by Lenovo. By following the steps in this article, you can easily perform this task and enjoy the benefits of having a properly configured system. 061ffe29dd